This is a custom order belt buckle using new Hornady bullets and 30-30 Winchester rifle case heads in the design. We take nine new factory 30 cal Full Metal Jacket rifle bullets (the bullets are copper jacket only, no lead cores) and join them together in circle. The outside ring in-between each bullet and in the center is a brass case head. The ring is then attached to a new commercial buckle back. There is no live primers.
This is a very difficult belt buckle to construct and may take several days to produce.
As we are using only used cases for these belt buckles, the manufacturer (headstamp) of the cases will vary. We always try to use brass coloured used primers when possible, however depending on our stock of used primers, these may vary as well. Our belt buckles are well made and will last a long time under normal use, however, care must be taken when handling.
As our belt buckles are individually hand crafted, each one is unique and subtly different in design and dimension.
Overall diameter is approximately 2 1/2" and weighs approximately 3.2 oz.
Our Belt Buckles fit a 1 1/2" to 1 3/4" wide Snap Belt.
~ pictures above show a different belt buckle for example of a Snap Belt ~
The belt in our pictures was hand crafted by Laroche Leathers and is shown for display purposes only. To purchase a quality custom made leather belt for your new belt buckle, drop by Laroche Leathers.
Destination
Service
S&H Fee
Insurance
Tracking
Transit Time
Canada *
Expedited Parcel
$ 7.50
included
included
1 - 3 weeks
USA
Small Packet Air
$ 7.55
included
n/a
2 - 3 weeks
* The following estimated charge will be added to Canadian orders
~ We automatically combine ship whenever possible ~
For additional information, please refer to our Shipping policies.
