BULLET NUT BOLT COVERS
$20.00 set |
 |
| Click on thumbnail images for larger pictures |
These are the most unique License Plate Nut Bolt Covers we have seen that will also dress up the ends of the bolts that hold the license plate on your motorcycle. They are handmade using new factory 45 cal Full Metal Jacket bullets and solid brass casings. They are threaded to fit 1/4" x 20 TPI (threads per inch) commonly available bolts that most folks use to attach their license plates and/or frames. As illustrated above, they need about 1/4" to 3/8" of thread to be firmly tightened.
Our Bullet Nut Bolt Covers are intended to be used on a license plate frame where the plate is mounted on the inside. If used on a license plate on the outside of a frame, the area where the bullet nut sits must be flat and accommodate the base, or they will not sit flat and straight.
These are hand made, assembled and polished and designed as a vanity license plate accessory. They should ONLY be hand tightened, DO NOT use a wrench or pliers, as you will strip the threads and also mark the bullet nut. Hold the head of the bolt with a wrench or other tool, then tighten the bullet nuts by only using your fingers until tight.
In the far right picture above, we have shown two different types of bolts commonly used, depending on the thickness of your frame and plate, the length of the bolt will vary as illustrated. You can also use the bullet nuts anywhere that you have a 1/4" x 20 TPI bolt such as crash bars, highway pegs, saddle bags, etc, to dress up your motorcycle or ATV.
We suggest that you coat the bullet nuts with varathane or something similar to prevent tarnishing (as these are made using brass and copper). We also suggest that you use something on the bolt threads to ensure they remain locked in place (lock tight, automotive silicone seal, etc).
Sold as set of four (4) Bullet Nuts WITHOUT bolts. |
 |
| Destination |
Service |
S&H Fee |
Insurance |
Tracking |
Transit Time |
| Canada |
Other Letter Mail |
$ 2.00 |
n/a |
n/a |
1 - 3 weeks |
| USA |
Light Packet |
$ 3.00 |
n/a |
n/a |
2 - 3 weeks |
|
|
| ~ We automatically combine ship whenever possible ~ |
| For additional information, please refer to our Shipping policies. |
|
|
|
